Fluke T5-1000 Electrical Tester Kit with Holster and 1AC II Voltage Tester
T5-1000 Electrical tester helps you get a lot done, fast
The T5-1000 Voltage Continuity and Current Tester is a versatile troubleshooting tool to carry to every job site. Use it to check voltage, continuity, and current with one compact tool. Just select volts, ohms, or current and the tester does the rest. Its OpenJaw™ current measurement lets you check current up to 100 A without breaking the circuit.
Detachable SlimReach™ test probes are customized for national electrical standards. Plus, its tough test leads accept optional accessories such as clips and specialty probes. The test leads stow neatly in the back of the tester, making it easy to carry in your tool pouch. Add the optional H5 holster and you can clip the T5-1000 onto your belt. For lower voltage applications check out the Fluke T5-600.
Other useful capabilities:
Features a compact design with handy probe storage
Withstands a 10 ft. (3 m) drop
Includes detachable SlimReach™ probe tips that are customized for national electrical standards
Can stay connected much longer than solenoid type testers
Offers Auto-off mode to conserve battery life
Fits into an optional holster that attaches to a belt and neatly stows test leads
Fluke 1AC II Non-Contact Voltage Tester – The pocket-sized voltage detector
The portable VoltAlert™ AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miss-wires of an electrical outlet.
Fluke T5-1000 Voltage, Continuity and Current Tester
Specifications
Jaw opening
12.9 mm (0.5 in)
Max wire size
1/0 THHN Cable
Current range AC rms
0 to 100.0 A
Accuracy AC current (50/60 Hz)
3% ± 3 counts
AC response
Averaging
Voltage range AC/DC
0 to 1000 V
Voltage accuracy
AC
1.5% ± 2 counts
DC
1% ± 1 count
Resistance range
0 to 1000 Ω
Continuity beeper threshold
On at < 25 Ω, off at > 400 Ω
Volts indicator LED threshold
Guaranteed on by 30 V AC
Environmental Specifications
Operating temperature
-10°C to 50°C
Storage temperature
-30°C to 60°C
Humidity (without condensation)
0% to 95% (5°C to 30°C);
0% to 75% (30°C to 40°C);
0% to 45% (40°C to 50°C)
Dust/water resistance
Yes
Operating altitude
2000 meters max
Temperature coefficient
0.1 x (specified accuracy)/°C (< 18°C or> 28°C)
Safety Specifications
Measurement Category
IEC 61010-2-032, IEC61010-2-033: CAT IV 600 V / CAT III 1000 V, 100 A ac
Agency approvals
CSA, TUV
Maximum voltage
1000 V between any terminal and earth ground
Mechanical and General Specifications
Size
30.5 x 51 x 203 mm
Weight
300 g
Warranty
Two-years
Battery life
200 hour zinc chloride, 400 hour alkaline
Battery type
2 x AA
Low battery indicator
Yes
Current sensor opening
12.9 mm
Fluke 1AC II Non-Contact Voltage Tester
Specifications
Operating Principles
Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing ranges
Nominally, 90 V AC to 1000 V AC
Detector tip style
Flat-tip
Light source
One high intensity red LED
Agency Approvals
Safety
IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V
EMC
IEC 61326-1: Portable
IP Rating
IP 40
Operating Temperature
-10°C to 50°C (-14°F to 122°F)
Operating Humidity Ranges
0% to 95% (0°C to 30°C)
0% to 75% (30°C to 40°C)
0% to 45% (40 to 55°C)
Operating Altitude
3000 m
Cleaning
Clean with damp cloth
Batteries
2 AAA alkaline batteries included
Battery Life
Typical battery life of greater than 1 year
Warranty Period
Two years
Product does not respond to random electrostatic discharge.
